Skip to content
Extena EU
  • Home page
  • Terms & Conditions
  • Contact us
    • All contacts
    • Sales
    • Product Management
    • HR
    • Finance
    • Management
    • Manufacturing
  • EU
    • SE
    • FI
Extena EU
  • About Extena
    • Extena leading development
    • A complete range
    • Safe supplier
    • Quality at the highest level
    • Best raw material
  • Application areas
    • Application areas
    • Water & Sewage
    • Gas
    • Mines
    • Industry
    • High pressures
    • Special applications
    • Customized pipes
    • Customized pipe fittings
  • Our products
    • Choosing the right pipe
    • Standard pipe PE100 RC
    • Multilayer pipes
      • Multilayer pipes
      • SLM – With sheath
      • SLM DCT – With function test
      • SLM DCS – With monitoring
      • HexelOne – For high pressure
      • SLA – Permeation barrier
      • 3L – With monitoring
    • Cable protection pipes
      • Cable protection pipes
      • SRS Cable protection pipes
      • SRE-P Cable protection pipes
      • Optical fibre Cable protection pipes
      • Other Cable protection pipes
    • Polarpipe – Frost protected
    • Pipes for relining
      • Pipes for relining
      • egeLiner
      • egeModul
    • Special pipes
      • Special pipes
      • egeFuse – Gravity pipeline SN16
      • egeStatic – Electrostatic resistance
      • egeTherm® High-T for high temperatures
      • egeSlurry® with protective interior
      • High pressure pipes PE100 RC homogeneous
      • Blast hole liner pipe
      • Marking posts
    • Pipe fittings
      • Pipe fittings
      • Injection moulded polyethylene pipe fittings
      • Machined polyethylene pipe fittings
      • Segment welded polyethylene pipe fittings
      • Seamless polythene bends
      • Arc welding parts
      • Flange joints
      • Pipe fittings for our pipe systems
      • Customized pipe fittings
  • Manufacturing & Quality
    • Higher requirements than standard
    • PE100 RC
      • PE100 RC
      • Pipe laying PE100 RC
    • New installation methods
    • High strength sheath
    • Certifications & Approvals
      • Certifications & Approvals
      • Nordic Poly Mark
      • DK-VAND
      • FI
      • PAS 1075
      • KIWA
      • TÜV
      • DVGW
      • 3.1 Certificate
  • Sustainabilty
    • Sustainabilty
    • Our products
    • Our raw material
    • Recycling
    • Renewable energy
    • Sustainable transport
  • Contact us
    • All contacts
    • Sales
    • Product Management
    • HR
    • Finance
    • Management
    • Manufacturing
Menu
  • About Extena
    • Extena leading development
    • A complete range
    • Safe supplier
    • Quality at the highest level
    • Best raw material
  • Application areas
    • Application areas
    • Water & Sewage
    • Gas
    • Mines
    • Industry
    • High pressures
    • Special applications
    • Customized pipes
    • Customized pipe fittings
  • Our products
    • Choosing the right pipe
    • Standard pipe PE100 RC
    • Multilayer pipes
      • Multilayer pipes
      • SLM – With sheath
      • SLM DCT – With function test
      • SLM DCS – With monitoring
      • HexelOne – For high pressure
      • SLA – Permeation barrier
      • 3L – With monitoring
    • Cable protection pipes
      • Cable protection pipes
      • SRS Cable protection pipes
      • SRE-P Cable protection pipes
      • Optical fibre Cable protection pipes
      • Other Cable protection pipes
    • Polarpipe – Frost protected
    • Pipes for relining
      • Pipes for relining
      • egeLiner
      • egeModul
    • Special pipes
      • Special pipes
      • egeFuse – Gravity pipeline SN16
      • egeStatic – Electrostatic resistance
      • egeTherm® High-T for high temperatures
      • egeSlurry® with protective interior
      • High pressure pipes PE100 RC homogeneous
      • Blast hole liner pipe
      • Marking posts
    • Pipe fittings
      • Pipe fittings
      • Injection moulded polyethylene pipe fittings
      • Machined polyethylene pipe fittings
      • Segment welded polyethylene pipe fittings
      • Seamless polythene bends
      • Arc welding parts
      • Flange joints
      • Pipe fittings for our pipe systems
      • Customized pipe fittings
  • Manufacturing & Quality
    • Higher requirements than standard
    • PE100 RC
      • PE100 RC
      • Pipe laying PE100 RC
    • New installation methods
    • High strength sheath
    • Certifications & Approvals
      • Certifications & Approvals
      • Nordic Poly Mark
      • DK-VAND
      • FI
      • PAS 1075
      • KIWA
      • TÜV
      • DVGW
      • 3.1 Certificate
  • Sustainabilty
    • Sustainabilty
    • Our products
    • Our raw material
    • Recycling
    • Renewable energy
    • Sustainable transport
  • Contact us
    • All contacts
    • Sales
    • Product Management
    • HR
    • Finance
    • Management
    • Manufacturing

Our products

  • Choosing the right pipe
  • Standard pipe PE100 RC
  • Multilayer pipes
    • Multilayer pipes
    • SLM – With sheath
    • SLM DCT – With function test
    • SLM DCS – With monitoring
    • HexelOne – For high pressure
    • SLA – Permeation barrier
    • 3L – With monitoring
  • Cable protection pipes
    • Cable protection pipes
    • SRS Cable protection pipes
    • SRE-P Cable protection pipes
    • Optical fibre Cable protection pipes
    • Other Cable protection pipes
  • Polarpipe – Frost protected
  • Pipes for relining
    • Pipes for relining
    • egeLiner
    • egeModul
  • Special pipes
    • Special pipes
    • egeFuse – SN16
    • egeStatic – Electrostatic resistance
    • egeTherm® High-T for high temperatures
    • egeSlurry® with protective interior
    • High pressure pipes PE100 RC homogeneous
    • Blast hole liner pipe
    • Marking posts
  • Pipe fittings
    • Pipe fittings
    • Injection moulded polyethylene pipe fittings
    • Machined polyethylene pipe fittings
    • Segment welded polyethylene pipe fittings
    • Seamless polythene bends
    • Arc welding parts
    • Flange joints
    • Pipe fittings for our pipe systems
    • Customized pipe fittings
Menu
  • Choosing the right pipe
  • Standard pipe PE100 RC
  • Multilayer pipes
    • Multilayer pipes
    • SLM – With sheath
    • SLM DCT – With function test
    • SLM DCS – With monitoring
    • HexelOne – For high pressure
    • SLA – Permeation barrier
    • 3L – With monitoring
  • Cable protection pipes
    • Cable protection pipes
    • SRS Cable protection pipes
    • SRE-P Cable protection pipes
    • Optical fibre Cable protection pipes
    • Other Cable protection pipes
  • Polarpipe – Frost protected
  • Pipes for relining
    • Pipes for relining
    • egeLiner
    • egeModul
  • Special pipes
    • Special pipes
    • egeFuse – SN16
    • egeStatic – Electrostatic resistance
    • egeTherm® High-T for high temperatures
    • egeSlurry® with protective interior
    • High pressure pipes PE100 RC homogeneous
    • Blast hole liner pipe
    • Marking posts
  • Pipe fittings
    • Pipe fittings
    • Injection moulded polyethylene pipe fittings
    • Machined polyethylene pipe fittings
    • Segment welded polyethylene pipe fittings
    • Seamless polythene bends
    • Arc welding parts
    • Flange joints
    • Pipe fittings for our pipe systems
    • Customized pipe fittings

Home » Special pipes » egeStatic – electrostatic resistance

egeStatic® – electrostatic resistance

For the transportation of gases, powders and flammable media. Dim ø 160 and 630 mm.

Many industrial applications include the transportation of dry gases, powders and flammable media. When transporting these substances in potentially explosive environments, all electrostatic charging of pipes and structures must be prevented by taking appropriate protective measures. To protect both humans and the environment, we offer egeStatic®, a pipe system with a conductive integrated layer. The pipe is used for e.g. the pneumatic transportation of dust, transportation of animal feed, pellets (fish farms) and explosive media, and for transportation in potentially explosive environments.

egeStatic®
Static charging environments require pipe systems that ensure the safe discharge of any static charge. For this applications, we have developed egeStatic®, a co-extruded homogeneous pipe made of PE 100-RC with a dimensionally integrated PE-EL (electrically conductive polyethylene) layer. Depending on the application and requirements, these layers can be placed on the inside and/or outside of the pipe.

Homogeneous pipes
Multilayer pipes can have strippable or homogeneous layers. The strippable layers can be stripped from the main pipe while homogeneous layers are an integral part of the pipe. egeStatic® is a homogeneous pipe with an integrated conductive layer on the inside and/or outside.

The table shows the difference in value for the electrical resistance of each surface. In the case of egeStatic, the surface of the pipe is resistant to electrostatic charges. This is crucial when transporting dry particles such as fish food, and reduces the risk of employees suffering unpleasant and harmful shocks. 

Product benefits

  • Pressure tight up to 10 bar
  • Corrosion resistant
  • Low net weight
  • Prefabrication, for example fixed lengths with pre-
    assembled flanges for easy installation, can be delivered as required
  • Lengths can be adapted to meet your requirements

Pipelaying methods

Extena Tryckrör Polyeten PE100 RC Läggning schakt

Traditional pipelaying in trenches.

Extena Tryckrör Polyeten PE100 RC Läggning schakt

Suitable for pipelaying adapted for pipes made of PE100 RC.

Läggning ovan mark

For pipelaying above ground.

Alternativa installation

Suitable for alternative installations.
Including indoors.

Alternativa installation 2

Suitable for alternative installations.

Facts

Pipe fittings

Extena Tryckrör Polyeten PE100 RC Rördel

PE pipe fittings

– Injection moulded
– Seamless
– Machined
– Segment welded

Extena rördel Polyeten Elsvetsmuff Tryckrör

Arc welding parts

Complete range of arc welding parts for different applications.

Extena rördel Polyeten Flänsförband Tryckrör

Flange joints

Wide range of flange joints such as loose flanges, SF flanges and HP flanges.

Extena Tryckrör Polyeten PE100 RC Specialtillverkad rördel

Customized pipe fittings

For egeStatic®, you can also order customized pipe fittings according to drawing.

Delivery options

Extena Tryckrör Polyeten PE100 RC Rulle

Coil

Extena Tryckrör Polyeten PE100 RC Raka längder

Straight lengths

6, 12, 18, 20 or 22 m

  • All pipes are fitted with end caps
  • Non-standard lengths can be ordered on request

Related documents

Extena Broschyr Tryckrör polyeten PE100 RC

Brochure

Download

Head office

Extena AB

Storlidenvägen 5

SE-935 93 Norsjö

SWEDEN

Telephone +46 (0)918-333 70

info@extena.se

www.extena.com

Corp. Reg. No. 556458-4448

  • Contact
Linkedin-in

Extena Finland

Telephone +358 2 7249353

info@extena.fi

www.extena.fi

  • Contact

Extena Norway

Telephone +47 483 42 558

info@extena.no

www.extena.no

  • Contact

Links

Privacy Policy

Top of the page
2023 ©